EMT Practice Test

1. Question Content...

---

Question1: You complete an installation of a FAS8200 that has two separate stacks of disk shelves.
In this scenario, which NetApp tool should be used to validate the disk shelf cabling?

Question2: Where would a cluster administrator move a FlexVol volume using the volume movecommand?

Question3: You have a RAID-DP aggregate with 42x 4 TB NL-SAS drives. The aggregate contains 3x RAID groups of
14 drives each (12 data + 2 parity), for a total of 36 data and 6 parity drives. You decide to convert the
aggregate to RAID-TEC for higher resiliency.
How many spare 4 TB drives are needed to complete the conversion?

Question4: You configure a new LUN on a NetApp cluster, and you can successfully access it from the host. An
application using the new LUN is having storage performance problems, and ONTAP is reporting
misalignment on the LUN.
In this scenario, what is causing the performance and misalignment problems?

Question5: Click the Exhibit button.

According to NetApp best practice, which ports are supported for FC as shown in the exhibit?

Question6: The vsadmin account for SVM vs1 is unlocked and configured with a password.
Which two statements are true about login methods for the vsadmin account? (Choose two.)

Question7: There is a node in your cluster that needs to be halted to replace a hardware component?
Which two statements are true in this scenario? (Choose two.)

Question8: A customer requires that their data is fully protected from theft, both at the volume layer and at the disk
layer.
Which two features of ONTAP satisfy this requirement? (Choose two.)

Question9: An SVM is configured to authenticate SVM administrators with the access method set to Password. A
computer account for the SVM exists on the Active Directory domain controller. You are now required to
authenticate administrators through the domain.
Which two steps are required to accomplish this task? (Choose two.)

Question10: Click the Exhibit button.

Referring to the exhibit, which physical are hosting the cluster interconnect interfaces on the nodes in
Cluster1?

Question11: Click the Exhibit button.

Referring to the exhibit, how are ports e4a and e4e being used?

Question12: Which three configurations does ONTAP Select support? (Choose four.)

Question13: Which three objects are restorable from a FlexVol Snapshot copy? (Choose three.)

Question14: You want to asynchronously replicate an SVM's volumes and configuration to another NetApp cluster.
Which data protection technology accomplishes this task?

Question15: What is the minimum number of disks required to create a RAID-DP data aggregate?

Question16: You are configuring replication between two NetApp clusters. You want to configure disaster recovery and
vaulting on the same destination volume.
In this scenario, which SnapMirror relationship type and SnapMirror policy type should be used?

Question17: Click the Exhibit button.

Referring to the exhibit, what is the throughput limit for the shares0 volume?

Question18: On which two types of ports would data LIFs be hosted?

Question19: Where would you look to find the minimum and the maximum number of array LUNs supported by
FlexArray?

Question20: Click the Exhibit button.

A storage administrator is unable to mount NFS volumes in the SVM1 namespace.
Referring to the exhibit, what is causing this problem?

Question21: You have a 2-node NetApp cluster with CIFS volumes and SAN LUNs on both nodes. The FC hosts have
MPIO correctly configured and see LUN paths through both NetApp nodes.
During a node failover, which two statements are true?

Question22: Which NetApp tool is used to perform a configuration validation and health check that includes a high-
availability setup?

Question23: An administrator encountered a ransomware attack that affected the active file system data. They have
been creating Snapshot copies on an hourly schedule. They determine that the entire volume needs to be
recovered.
In this scenario, which command would you use?

Question24: You have an 8-node cluster and need to test a ping to all cluster interconnect ports between all of the eight
in one command.
Which advanced command would accomplish this task?

Question25: Click the Exhibit button.

If you change the aggr1 RAID type shown in the exhibit from RAID-DP to RAID-TEC, how many additional
disks are required?

Question26: You use the Automated Workload Analyzer (AWA) to identify workloads that would benefit from which
feature?

Question27: Click the Exhibit button.

You need to create a 200 GB volume that requires 700 IOPS.
Referring to the exhibit, in which aggregate should you create the volume?

Question28: A customer wants to add nodes to an 8-node AFF A700 NAS cluster.
In this scenario, what is the maximum number of additional nodes?

Question29: Click the Exhibit button.

You use the commands shown in the exhibit to provision a FlexVol volume and LUN on an AFF A300. The
volume shows 40% storage efficiency savings.
In which container is the free space returned?

Question30: You want to configure Active Directory authentication for a cluster. You have performed the following
actions:
- created the SVM,
- joined the SVM to Active Directory,
- created the domain tunnel.
You attempt to log in to the cluster as an Active Directory user but access is denied.
How would you solve this problem?

Question31: You want to configure a local cluster to accept SnapMirror transfers from two remote clusters. The two
remote clusters have overlapping IP networks and cannot change their IP addressing scheme.
In this scenario, which action you perform to allow both remote clusters to replicate to the local cluster?

Question32: A cluster is running ONTAP 9.3. You create a SnapMirror relationship and specify the type as DR and the
policy as MirrorAllSnapshots. When you view the newly created relationship; you notice that the policy is
MirrorAllSnapshots, but the type is XDP, not DP.

Question33: You create a Snapshot copy of a new volume.
Which activity increases the size of the new Snapshot copy?

Question34: A storage administrator has a Linux Oracle database that is using a SAN configuration with multiple dual-
ported FC HBA connections for path resiliency and performance. The HBA ports are configured to
separate FC switches.
Before configuring the LUNs from the storage, what information must be obtained from the host? (Choose
three.)

Question35: Click the Exhibit button.

Assuming that the export policy on the storage allows access, you want to enable client access to the
financevolume in the departmentsSVM in the /tmp/fin directory.
Referring to the exhibit, which UNIX command must be executed to accomplish this task?

Question36: You want e-mail notifications sent to you automatically when latency reaches a warning level of 15
milliseconds and a critical level of 20 milliseconds in a volume that stores your Oracle database files.
In this scenario, which type of threshold policy should be created within OnCommand Unified Manager?

Question37: When a cluster is created, which two objects are required to provide management access? (Choose two.)